ME9 / P2107 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Throttle Motor, ECM Internal Failure
Fault symptom
Malfunction Indicator Lamp
On-board diagnosis
Type of diagnosis:
Enable criteria:
Battery voltage must be between 10 - 18 V. |
Coolant/intake temperature 5 - 60°C. |
Accelerator pedal position less than 15%. |
Diagnostics run when the engine is off and the ignition key is in the ON position. |
Fault criteria:
The control module detects that the internal signal that regulates the throttle motor does not match the signal from throttle position potentiometer 1 (motor opens/closes too much in relation to sensor 1). |