ME9 / P2176 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Throttle Mechanical, Can Not Reach Closed Position
Fault symptom
Malfunction Indicator Lamp
On-board diagnosis
Type of diagnosis:
Enable criteria:
Battery voltage must be between 10 - 18 V. |
Engine speed under 40 rpm. |
The coolant temperature is between 5 °C and 85 °C. |
The intake air temperature is between 5 °C and 60 °C. |
The pedal position sensor position is lower than 15%. |
Fault criteria:
When the signal from throttle position sensor 1 is not between 0.2 and 0.9 V during the self-programming process. |
When the signal from throttle position sensor 4 is not between 4.2 and 4.8 V during the self-programming process. |
Throttle programming fails after replacing the engine control module. |
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
• | Throttle Position Sensor 1 |
• | Throttle Position Sensor 2 |
(See also description of readings/activations in diagnostic tool) |