ME9 / P2187 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
The engine may stop after starting, run unevenly and misfire or run at high rpm.
Long Term Fuel Trim Additive. Max Value, Air/Fuel too Lean.
Fault symptom
Malfunction Indicator Lamp
The engine may stop after starting, run unevenly and misfire or run at high rpm.
On-board diagnosis
Type of diagnosis:
Enable criteria:
The engine has started and lambda control is active. |
An additive adaptation is carried out. |
Cooling and intake air temperature 60°C. |
Fault criteria:
The additive adaptation factor is greater than 5.25%. |
Diagnostic help
Diagnosis regards:
Checking air/fuel ratio. With this DTC, the engine will be getting too much air or too little fuel. |
A crankcase ventilation leak may be one reason as to why a DTC is set. Check crankcase ventilation function before starting regular troubleshooting. |
Functions in the diagnostic tool related to the fault:
• | Airmass Deviation from Calculated |
(See also description of readings/activations in diagnostic tool) |