SAAB WIS ONLINE

ME9 / P2261 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Malfunction Indicator Lamp

  P2261 00


Turbocharger Bypass Valve, Mechanical Failure

Fault symptom

Malfunction Indicator Lamp

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Battery voltage must be between 10 - 18 V.
Engine running.
Bypass valve active.

Fault criteria:

Bypass valve stuck in closed position. Pulsation in intake manifold during engine braking (when valve should open) is higher than calibrated value. Value based on actual and modelled air mass (throttle position and boost pressure).

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Functions in the diagnostic tool related to the fault:

Test value:
Charge Air Bypass Solenoid

Activation:
Charge Air Bypass Solenoid

(See also description of readings/activations in diagnostic tool)