PDM / B3900 48

Read the instructions below then start the fault diagnostic procedure.

Symptom: Message appears in display. Car does not start.

B3900 48

Fault symptom

Message appears in display.

Car does not start.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Diagnostics run when ignition is ON.

Fault criteria:

Control Module not Added

System reaction to a fault:

The immobilizer-related functions are switched off.

Diagnostic help

Control module was not added.

See "Procedure after fitting the control module"

Diagnostic help

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"