PSM / B3942 61
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Memory functions not working
Easy Entry Motor Output Circuit, Relay Stuck to Ground
Fault symptom
Memory functions not working
On-board diagnosis
Type of diagnosis:
Continually when the engine is run. |
Enable criteria:
When seat operation is permitted. |
Fault criteria:
Easy Entry motor, forward: |
Voltage on the control module output exceeds 6 ±0.2V. |
Easy Entry motor, backward: |
Control module output voltage exceeds B+. |
System reaction to a fault:
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |