RRDM / B3963 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Lock malfunction.
TSL Sensor Failure
Fault symptom
Lock malfunction.
On-board diagnosis
Type of diagnosis:
Enable criteria:
When the car is TSL-locked. |
Fault criteria:
Engine has locked TSL mode without status change on the sensor. |
The engine has exited TSL mode without status change on the sensor. |
System reaction to a fault:
Piston position bus signal "invalid" when fault is detected. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |