SIMTEC / P0335 0F
Read the instructions below then start the fault diagnostic procedure.
| P0335 0F |
Crankshaft Sensor Incorrect Signal
On-board diagnosis
Fault criteria:
| The control module does not detect a signal from the crankshaft position sensor. |
| The control module has identified an implausible crankshaft speed. The control module has not identified 58 tooth impulses between the synchronisation marks on the crankshaft gear. The time that a tooth gap is identified is implausible. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
