SLM / P1802 08
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
No Sentronic function.
Selector lever locked in position P or N.
Sentronic, Invalid Signal.
Fault symptom
Message appears in display.
No Sentronic function.
Selector lever locked in position P or N.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
The control module receives a faulty signal. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in the component. |
Functions in the diagnostic tool related to the fault:
• | Selector Position Sentronic |
• | Selector Position Sentronic Up |
• | Selector Position Sentronic Down |