SPA / U2101 46
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Parking assistance not working.
Message appears in display.
Control Module not Added
Fault symptom
Parking assistance not working.
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
• | Battery voltage greater than 9 V. |
Fault criteria:
Control module not configured. |
System reaction to a fault:
• | Parking assistance is switched off. |
Diagnostic help
Control module was not added.
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Diagnosis regards:
To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |