SAAB WIS ONLINE

STC / B1010 08

Read the instructions below then start the fault diagnostic procedure.

Symptom: Possible message on the display Soft top cannot be operated

  B1010 08


Position Sensor, Invalid Position

Fault symptom

Possible message on the display

Soft top cannot be operated

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.
Soft top opening/closing activated

Fault criteria:

One of the position sensors is incorrectly positioned in comparison with the other position sensors.

System reaction to a fault:

Control module switches off soft top operation

Diagnostic help

Diagnosis regards:

The soft top is operated in sequences. Each sequence must begin with the sensors in a position that matches the movement pattern.

Functions in the diagnostic tool related to the fault:

Test value:
1st Bow Locked
1st Bow Ready to Latch
Tonneau Cover Latched Left
Tonneau Cover Latched Right
Soft Top Stowage Up
Soft top cover up
6th Bow Up
6th Bow Latched Left
6th Bow Latched Right
Main Cylinder Up
Main Cylinder Down

Other
Sensor Test

(See also description of readings/activations in diagnostic tool)