T8 / P0337 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Engine cannot be started during permanent fault.
Engine dies while running/idling.
Message in SID regarding TCM and TCS/ESP.
Crankshaft Position Sensor. No Input.
Fault symptom
Malfunction Indicator Lamp
Engine cannot be started during permanent fault.
Engine dies while running/idling.
Message in SID regarding TCM and TCS/ESP.
On-board diagnosis
Type of diagnosis:
Enable criteria:
System voltage drops by more than 0.5 V. |
Pressure in intake manifold drops more than 1 kPa. |
Fault criteria:
If the input conditions are fulfilled for more than 2 s, the damper is closed for 2 s to evaluate the relationship between intake pressure and atmospheric pressure. If intake pressure is less than atmospheric pressure + 3 kPa for 0.5 s, a DTC is generated. |
Dependent:
System reaction to a fault:
OK report:
When the signal from the crankshaft position sensor exceeds 100 rpm. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
• | Manifold Absolute Pressure |
(See also description of readings/activations in diagnostic tool) |