T8 / P0339 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Jerky movements.
Message in SID regarding TCM and TCS/ESP.
Crankshaft Position Sensor Circuit. Incorrect Signal.
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Jerky movements.
Message in SID regarding TCM and TCS/ESP.
On-board diagnosis
Type of diagnosis:
Enable criteria:
• | Crankshaft signal detected. |
• | Fault criterion for test 1 is not fulfilled. |
• | Engine running at least 3 seconds. |
• | Vehicle speed over 30 km/h |
• | Brake pedal NOT depressed. |
Fault criteria:
• | No crankshaft signal more than 8 times in 10 ms for a 3 s period. |
• | Crankshaft signal missing more than 3 times in 10 ms during the entire driving cycle. |
Dependent:
System reaction to a fault:
OK report:
Fault criteria for tests 1 and 2 are not fulfilled for 5 s. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
(See also description of readings/activations in diagnostic tool) |