T8 / P0633 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The car will not start.
Control Module not Added
Fault symptom
The car will not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Ignition on for at least 3 s. |
Fault criteria:
Security code not programmed. |
Dependent:
System reaction to a fault:
Starter motor cannot be started. |
OK report:
Fault criteria NOT fulfilled. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |