T8 / P1351 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Performance loss.
Misfiring
Ignition Coil Trig Cylinder 1 Circuit, Signal Missing at CDM
Fault symptom
Malfunction Indicator Lamp
Performance loss.
Misfiring
On-board diagnosis
Type of diagnosis:
Enable criteria:
No fault on main relay (P0685, P0686 and P0687). |
Fault criteria:
When there is no trigger signal, ignition coil cyl 1 to CDM (pin 9) for 16 combustions. |
Dependent:
System reaction to a fault:
Torque limited to max. 170Nm. |
OK report:
When trigger signal, ignition coil is detected 4 times in a row per cylinder (total 16 combustions). |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting lead or in the CDM. |
P1351 deletes P0301 if it was set previously. |
Functions in the diagnostic tool related to the fault:
• | Combustion Signal cyl 1+3 |