T8 / P1615 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The car will not start.
T8 or CIM Not Added
Fault symptom
The car will not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
CIM does not recognise T8. |
The immobilization codes in T8 and the CIM do not correlate. |
Dependent:
System reaction to a fault:
Starter motor cannot be started. |
OK report:
Fault criteria NOT fulfilled. |
Diagnostic help
Both T8 and CIM are programmed but one of the units is in the wrong car.
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |