TCM EDC16 / U2101 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Gearbox not shifting gear.
Control Module not Added
Fault symptom
Message appears in display.
Gearbox not shifting gear.
On-board diagnosis
Type of diagnosis:
| During each initiation and after each programming |
Enable criteria:
Fault criteria:
| The control module is not EOL programmed. |
System reaction to a fault:
| Gearbox not shifting gear. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
