TCM ME9 / P0717 00
Read the instructions below then
start the fault diagnostic procedure.
Input RPM. No Signal.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
No signal from input speed sensor. |
System reaction to a fault:
If the DTC remains during several test cycles: |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |