TCM ME9 / P0734 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Gear 4, Faulty Gear Ratio.
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Engine running and not in limp home mode. |
Accelerator pedal position <10 %. |
Driver not driving in 4th gear. |
• | Normal exceptions for shifting error DTC: |
Selector lever not in position D. |
Battery voltage < 10.5 Volt. |
• | Malfunction in one of the following systems: |
Gear selector position sensor |
Gearbox Fluid Temperature Sensor |
Accelerator pedal position. |
Fault criteria:
Gear ratio measured by the control module varies more than 20 % from the expected value. |
System reaction to a fault:
Diagnostic help
Diagnosis regards:
Locating a mechanical fault. |