TCM T8 / P0986 05
Read the instructions below then start the fault diagnostic procedure.
Symptom: Message appears in display.
P0986 05 |
Fault symptom
Message appears in display.On-board diagnosis
Type of diagnosis:
Continuous |
Enable criteria:
Engine running and not in limp home mode. |
Fault criteria:
Solenoid signal output is OFF but the input receives an ON signal. |
System reaction to a fault:
Limp home |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |