TCM T8 / U0212 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
CIM Missing on BUS
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Engine running and not in limp home mode. |
Voltage is over 9V but under 16V |
Fault criteria:
CIM Not Added or Missing on Bus |
System reaction to a fault:
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault on bus leads or in the component. |