TCS/ESP / C0110 02

Read the instructions below then start the fault diagnostic procedure.

Symptom: ABS/TCS/ESP warning lamp on. Message appears in display. Steering column lock not working.

C0110 02

Fault symptom

ABS/TCS/ESP warning lamp on.

Message appears in display.

Steering column lock not working.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Car speed over 5 km/h

Pump motor activated.

Fault criteria:

The control module does not receive a signal from the pump motor.

System reaction to a fault:

No ABS function

No TCS/ESP function

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

____________________________________

Diagnosis is run each time a driving cycle starts and when the pump motor is activated.

Functions in the diagnostic tool related to the fault:

Test value:

Pump Feed

Activate:

Pump Feed

(See also description of readings/activations in diagnostic tool)