SAAB WIS ONLINE

TCS/ESP / C0131 08

Read the instructions below then start the fault diagnostic procedure.

Symptom: Warning lamp lights. Message appears in display.

  C0131 08


Pressure sensor Circuit, Signal not Plausible

Fault symptom

Warning lamp lights.

Message appears in display.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.
Test 1

Brake light switch not activated.
Vehicle accelerating with engine power.
Test 2

Vehicle speed more than 7 km/h.
Acceleration more than 2 m/s2
No TCS regulation.
Test 3

Brake light switch activated.
Retardation more than 5 m/s2.
Test 4

Brake light switch not activated.
No TCS regulation.
Vehicle accelerating with engine power.

Fault criteria:

Test 1

Pedal pressure exceeds 25 bar for more than 2.5 seconds.
Test 2

Pedal pressure exceeds 50 bar for more than 2.5 seconds.
Test 3

Brake light switch activated more than 5 times and pedal pressure less than 1.4 bar for more than 2.5 seconds.
Test 4

Pedal pressure exceeds 20 bar.

System reaction to a fault:

No ESP function

Diagnostic help

Diagnosis regards:

Electrical fault in the component.

Functions in the diagnostic tool related to the fault:

Test value:
Brake Light Switch
Pedal Pressure
(See also description of readings/activations in diagnostic tool)