TCS/ESP / C0800 07
Read the instructions below then
start the fault diagnostic procedure.
Symptom: ABS/TCS/ESP warning lamp on.
Message appears in display.
Steering column lock not working.
Supply voltage Too High
Fault symptom
ABS/TCS/ESP warning lamp on.
Message appears in display.
Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Battery voltage exceeds 18.5 V for 0.5 s. |
System reaction to a fault:
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
| ____________________________________ |
| The DTC can be generated if a 24V battery charger is used to charge the battery or if another vehicle with 24V battery, e.g. a truck, has been used to help start the car. |
Functions in the diagnostic tool related to the fault:
| (See also description of readings/activations in diagnostic tool) |
