TCS/ESP / C0895 08
Read the instructions below then
start the fault diagnostic procedure.
Symptom: ESP warning lamp on.
Message appears in display.
Yaw Rate Sensor, Supply Voltage Out of Range
Fault symptom
ESP warning lamp on.
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Voltage to yaw rate sensor below 7.8 V for 10 seconds with ignition on. |
System reaction to a fault:
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
The sensor is a combined yaw angle sensor and lateral acceleration sensor.