Configuration of dipped beam/front fog lights
|
Configuration of dipped beam/front fog lights
|
As part of the pre-delivery service, make the following settings on cars for the SE market. These settings prevent dipped beam and the front fog lights from being on at the same time.
1.
|
Connect Tech 2 and select F0:
Diagnose
|
2.
|
Select the model year and car model.
|
4.
|
Select "
Most Common Adjustments"
|
5.
|
Select "
Fog Lights Front"
|
6.
|
Press the "
Select" button
|
7.
|
Select "
Pos 1 (and 2 if High Beam) (Special)"
|
8.
|
For programming, select OK
Note
|
If the car is not configured for fog lights but fog lights are installed, the message "Fog lights not installed!" will appear in Tech2.
|
|