Rear torque arm
Rear torque arm |
To remove |
1. |
Raise the car.
|
2. |
Remove the nuts from the front exhaust pipe on the catalytic converter. Take the strain off the front section with
83 95 212 Strap
.
|
3. |
Remove the rear torque arm bracket.
|
4. |
Remove the rear torque arm.
|
To fit |
1. |
Fit the rear torque arm.
Tightening torque 60 Nm (44 lbf ft) |
2. |
Fit the rear torque arm bracket.
Tightening torque 80 Nm (59 lbf ft). |
3. |
Fit the rear exhaust pipe. Remove the strap.
Tightening torque 25 Nm (18 lbf ft). |
4. |
Lower the car.
|