Level sensor, engine oil (243)

/ 9-3 (9440) / 2007 / 2. Engine / 4-cylinder diesel / Basic engine / Adjustment/replacement / Level sensor, engine oil (243)

To remove

1.	Remove the oil sump. See Oil sump in car.

2.	Remove the baffle plate.

3.	Remove the connector clip.

4.	Remove the oil level sensor.

To fit

1.	Fit the oil level sensor to the oil sump. Tightening torque xx Nm (xx lbf ft)

2.	Fit the connector with a new O-ring sparingly lubricated with Vaseline.

3.	Fit the retaining clip.

4.	Fit the baffle plate.

5.	Fit the oil sump, see Oil sump in car .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.