Oil sump
Oil sump |
To remove |
1. |
Place the engine on a stand.
|
2. |
Drain the engine oil
|
3. |
Rotate the engine 180° on the stand.
|
4. |
Remove the oil sump's insulation.
|
5. |
Remove the front and rear bolts from the oil sump using
32 025 015 Extension piece Ribe M7
.
|
6. |
Remove the side bolts on the oil sump using
32 025 016 Extension piece Ribe M8
.
|
7. |
Remove the oil sump.
|
8. |
Remove the oil level sensor.
|
9. |
Remove the crankcase ventilation hose.
|
10. |
Remove the oil separator cover.
|
To fit |
1. |
Fit the oil separator cover in the oil sump.
|
2. |
Fit the crankcase ventilation hose.
|
3. |
Fit the oil level sensor.
Tightening torque 30 Nm (22 lbf ft) |
4. |
Apply 90 543 772 Silicone flange sealant to the oil sump sealing surface.
|
5. |
Fit the oil sump.
|
6. |
Fit the side bolts using
32 025 016 Extension piece Ribe M8
. Tighten the front and rear bolts with
32 025 015 Extension piece Ribe M7
Tightening torque, M6, 9 Nm (7 lbf ft) Tightening torque, M8 25 Nm (18 lbf ft) |
7. |
Fit the oil sump's insulation.
|
8. |
Remove the engine from the engine stand.
|