SAAB WIS ONLINE

Throttle body actuator unit (604)

Throttle body actuator unit (604)

To remove


1. Remove the upper engine cover and insulation.


2. Remove the hose between the throttle body and the turbo delivery pipe.

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Remove the actuator connector.


4. Remove the throttle body.


To fit


1. Clean the sealing surfaces, use a new gasket. Fit the throttle body.

Tightening torque 9 Nm (6 lbf ft).

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



2. Plug in the actuator connector.

3. Fit the hose between the throttle body and the turbo delivery pipe.


4. Fit the insulation and the upper engine cover.