SAAB WIS ONLINE

Oil sump

Oil sump

To remove


1. Remove Power train.

2. Remove Camshaft covers, removed engine .

3. Remove the Timing cover .

4. Remove the oil cooler assembly from the cylinder block. Remove the gasket.


5. Remove the oil sump. Carefully prise with a pry bar.


6. Clean sealing surfaces of gasket residue and the like.


To fit


1. Apply a 2 mm thick bead of 93 160 951 Flange sealant on the oil sump's sealing surface and fit a new seal on the oil sump intake pipe.


2. Fit the oil sump.

Tightening torque, M6 bolts: 10 Nm (7 lbf ft)

Tightening torque, M8 bolts, 25 Nm (18 lbf ft).


3. Fit a new gasket and fit the oil cooler to the cylinder block.

Tightening torque 25 Nm (18 lbf ft)


4. Fit Timing cover .

5. Fit Camshaft covers, removed engine .

6. Fit Power train.