Control module, AHL (664)
Control module, AHL (664) |
To remove |
Carry out actions before removing control module .
1. |
Remove the battery cover lid.
|
2. |
Remove the filler pipe of the washer reservoir.
|
3. |
Remove the main fuse box cover.
|
4. |
Remove the nuts.
|
5. |
Lift up the control module and detach the connector.
|
To fit |
Important | ||
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
1. |
Plug in the connector.
|
2. |
Fit the control module.
|
3. |
Fit the main fuse box cover.
|
4. |
Fit the filler pipe of the washer reservoir.
|
5. |
Fit the battery cover lid.
|
6. |
Carry out
actions after replacement of control module
. The control module is calibrated when "
Add" is carried out, see
calibration of AHL control module
.
|