Changing the key battery
Changing the key battery |
1. |
Press the badge on the back of the remote control and remove the emergency key.
|
2. |
Insert the tip of the key into the small hole and turn the key to split the remote control.
|
3. |
Change the battery.
|
4. |
Fit together the two halves of the remote control.
|
After changing the battery, it may be necessary to synchronize the remote control with the car's receiver. The remote control is synchronized after a change of battery the first time it is inserted into the ignition switch. If the battery has been changed outside the car and the car is locked, proceed as follows:
1. |
Unlock the front left door with the traditional key. If the car has a car alarm, this will be tripped.
|
2. |
Open the door, insert the remote control into the ignition switch and turn the remote control. If the car has a car alarm, this will be silenced. The remote control and receiver unit are now synchronized.
|