Control module, BCM (707)
|
Control module, BCM (707)
|
•
|
The exterior and interior lighting
|
•
|
Direction indicators and hazard warning lights
|
•
|
Gateway between the two galvanically separated I-buses.
|
•
|
Comfort opening/Comfort closing
The BCM also has the task of gathering information from
|
•
|
Level sensor for coolant/brake fluid
|
•
|
Outside temperature sensor
|
•
|
Rheostat, instrument illumination
|
•
|
Anti-theft alarm bonnet switch,
|
The BCM has a microprocessor with clock, RAM memory and a flashable ROM. An internal bus that interconnects the processor and memory with the I/O unit. The I/O unit answers for gathering values from the A/D converter for analogue inputs, digital inputs, bus and to activate the transistors in the power amplifiers.
For information on the control module, see
Control modules, general description
.
Power supply, ground and bus communication
|
Pin
|
Signal type
|
Description
|
6
|
Electronic ground
|
For everything except fuel filler flap solenoid
|
21
|
Power ground
|
For fuel filler flap solenoid
|
5
|
+30
|
For everything except fuel filler flap solenoid
|
16
|
+30
|
For fuel filler flap solenoid
|
40
|
I-bus
|
Bus communication
|
41
|
I-bus
|
Bus communication
|
24
|
I-bus
|
Bus communication between the EHU, SDAR, OnStar, TMC and other control modules connected to the bus
|
+30 is fed via the connector which is directly connected to the main fuse box.