Rear window wiper motor, 5D
Rear window wiper motor, 5D |
To remove |
1. |
Remove
Tailgate trim
.
|
2. |
Remove the wiper arm. Use
85 80 144 Puller, windscreen wiper arm
.
|
3. |
Remove the wiper motor bolts. Unplug the connector and lift out the wiper motor.
|
To fit |
Important | ||
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
1. |
Put in place the wiper motor. Fit the wiper motor bolts and plug in the connector.
|
2. |
Check that the motor has stopped in parking position.
|
3. |
Fit the wiper arm. The wiper blade must lie between the markings on the rear window.
Tightening torque 20 Nm |
4. |
Fit
Tailgate trim
.
|