Checklist for replacement of control module, DZM
ECU REPLACEMENT CHECKLIST SHEET |
THESE SHEETS MUST BE FILLED IN AND RETURNED WITH THE REPLACED PART.
IF THE SHEETS ARE MISSING OR NOT FILLED IN PROPERLY, WARRANTY CLAIM MAY BE REJECTED.
REPLACEMENT CHECKLIST SHEET
|
DZM |
Date:
|
||||||||
Door Zone Modules (DDM, PDM, RLDM, RRDM) | ||||||||||
BACKGROUND INFORMATION: | PROBLEM AREA: | |||||||||
Dealer contact person: | Side view mirrors: |
|
||||||||
Trunk release: |
|
|||||||||
Power windows: |
|
|||||||||
Dealer contact telephone (incl international country code): | Windows Anti-Pinch: |
|
||||||||
Door locks: |
|
|||||||||
VIN | Courtesy lights: |
|
||||||||
Km/miles: | Immobilizer: |
|
||||||||
Customer Complaint: | Noise: |
|
||||||||
Other: |
|
|||||||||
(If other, please describe below) | ||||||||||
|
||||||||||
Please get the part numbers below from the TECH2 |
|
|||||||||
End model part number: | ||||||||||
Software part number: | ||||||||||
Base model part number: | ||||||||||
ANALYSIS: | ||||||||||
0- Which module is suspected of causing trouble? DDM PDM RRDM RLDM | ||||||||||
1- Read out ALL DTCs in the vehicle and mark with an "X" in the list on page | YES NO | |||||||||
2- Delete all DTCs present in the vehicle | YES NO | |||||||||
3- Is it possible to repeat the Customer Complaint at the workshop? | YES NO | |||||||||
4- Is the troubleshooting according to WIS performed? | YES NO | |||||||||
5- Are there problems with Rattle & Squeak? | YES NO | |||||||||
6- Disconnect the unit, check all connectors and the wiring harness in the system concerned: | YES NO | |||||||||
7- Is/are the DTCs still present after checking all above and retesting the vehicle? | YES NO | |||||||||
(If YES, please describe below and DO NOT delete the DTCs if you are returning the replaced DZM to Saab). | ||||||||||
8- Are any other parts
in the car replaced in order to fix this actual problem?
If so, please describe below: |
YES NO | |||||||||
|
||||||||||
DECISION: | ||||||||||
9- If DZM is replaced, please describe the reason for DZM replacement/dealer analysis result: NOTE! ATTACH THIS CHECKLIST TO THE REPLACED PART(S). Please do not forget to attach ALL replaced fuses and/or relays to the replaced parts. | ||||||||||
10- Did the replacement(s) correct the issue? | YES NO |
THESE SHEETS MUST BE FILLED IN AND RETURNED WITH THE REPLACED PART.
IF THE SHEETS ARE MISSING OR NOT
FILLED IN PROPERLY, WARRANTY CLAIM MAY BE REJECTED.
DTC List
Mark with
a X in the left column if the DTC is active in the system.
DZM
|
||
DTC
Active? |
DTC
|
DESCRIPTION
|
B1008 | ECU Not End of Line programmed | |
B1721 | OSRVM Switch Failure (Only valid for DDM) | |
B3205 | Power Window Down Output Failure | |
B3210 | Power Window Up Output Failure | |
B3355 | Power Window Hall Sensor Supply Failure | |
B3542 | Power Window Hall Sensor 1 Failure | |
B3933 | Power Window Hall Sensor 2 Failure | |
B1585 | OSRVM Hor-Position Potentiometer Failure (Only valid for DDM and PDM) | |
B1595 | OSRVM Ver-Pos Potentiometer Failure (Only valid for DDM and PDM) | |
B1583 | OSRVM Potentiometer Supply Failure (Only valid for DDM and PDM) | |
B1723 | OSRVM Left / Right Output Failure (Only valid for DDM and PDM | |
B1600 | OSRVM Common Output Failure (Only valid for DDM and PDM) | |
B1724 | OSRVM Up / Down Output Failure (Only valid for DDM and PDM) | |
B1364 | Potentiometer Ground Failure (Only valid for DDM and PDM) | |
B1640 | OSRVM Heating Failure (Only valid for DDM and PDM) | |
B1722 | OSRVM Folding Output Failure (Only valid for DDM and PDM) | |
B1549 | OSRVM Unfolding Output Failure (Only valid for DDM and PDM) | |
B2730 | Trunk Release Button (Only valid for DDM) | |
B3797 | TSL Output Failure (Not valid for 442 RLDM and 442 RRDM) | |
B3130 | Door Unlock / TSL Output Failure (Not valid for 442 RLDM and 442 RRDM) | |
B3135 | Door Lock Output Failure (Not valid for 442 RLDM and 442 RRDM) | |
B3817 | Door Lock / Unlock Sensor Failure (Only valid for locks with sensors & Not valid for 442 RRDM and 442 RLDM) | |
B3270 | Inside Central Lock Switch Failure (Only Valid for DDM and PDM) | |
B2652 | External Panel Dim Output Failure(Only Valid for DDM,PDM) | |
B2635 | Courtesy Light Failure (Only valid for DDM and PDM) | |
B3380 | Power Window Driver Module Left front down Switch Failure | |
B3465 | Power Window Driver Module Left Front Express Down / Express Up Switch Failure | |
B3375 | Power Window Driver Module Left Front Up Switch Failure | |
B3450 | Power Window Driver Module Left Rear Down Switch Failure | |
B3475 | Power Windows Driver Module Left Rear Express Down / Express Up Switch Failure | |
B3395 | Power Window Driver Module Left Rear Up Switch Failure | |
B3390 | Power Window Driver Module Right Front Down Switch Failure | |
B3470 | Power Window Driver Module Right Front Express Down / Express Up switch Failure | |
B3385 | Power Window Driver Module Right Front Up Switch Failure | |
B3460 | Power Window Driver Module Rear Right Down Switch Failure | |
B3480 | Power Window Driver Module Rear Right Express Down / Express Up Switch Failure | |
B3455 | Power Window Driver Module Rear Right Up Switch Failure | |
B3175 | Power Window Passenger Module Down Switch Failure | |
B3280 | Power Window Passenger Module Express Down / Express Up Switch Failure | |
B3170 | Power Window Passenger Module Up Switch Failure | |
B3185 | Power Window Left Rear Door Module Down Switch Failure | |
B3285 | Power Window Left Rear Door Module Express Down / Express Up Switch Failure | |
B3180 | Power Window Left Rear Door Module Up Switch Failure | |
B3195 | Power Window Rear Right Door Module Down Switch Failure | |
B3290 | Power Window Rear Right Door Module Express Down / Express Up Switch Failure | |
B3190 | Power Window Rear Right Door Module Up Switch Failure | |
B3932 | Window Current Measurement Failure (Fault code only available in that cars that have window motors that have hall sensors) | |
B1480 | Over / Under Voltage Failure | |
B3543 | Hall sensor signal in reversed order (On cars that have power window motors with hall sensors) | |
B3934 | Indication Error Mirror Movement (Only valid for DDM and PDM) | |
B1000 | ECU Failure | |
B3057 | No Security code Programmed (Only Valid for PDM) | |
B3899 | No Environment Identifier Programmed (Only valid for PDM) | |
B3900 | No Immobilizer Identifier Programmed (Only valid for PDM | |
B3902 | Wrong Immobilizer Identifier Received (Only valid for PDM) | |
B1339 | Power Feed Missing | |
B3200 | Power Window Lockout / Anti-Pinch Override Switch Stuck (Only valid for DDM) | |
B3832 | Anti-Pinch Initialization Not Done | |
B3963 | TSL Sensor failure (Only valid for locks with sensors & Not valid for 442 RLDM and 442 RRDM) | |
B3992 | Window Stroke failure | |
B1001 | Anti-Pinch Initialization Not Done (442 only) | |
B3994 | Anti-Pinch Shut Off |
DTCs RELATED TO OTHER UNIT(S) | ||
DTC
|
DESCRIPTION
|
|