Bootlid switch (388)
| Bootlid switch (388) |
| Location |
Bootlid switch (388)
| Main task |
Used to open the bootlid.
| Type |
The button is non-locking and contains a single pole breaker that is made when pushed in. The button has 2 integrated LEDs for background lighting.
| Connect |
The button has direct chassis grounding and is fed with 5V via a resistor of 2.7kΩ integrated in DDM. The control module input is digital, a voltage above 2V is interpreted as an open circuit while lower than 2V is interpreted as closed. The LEDs are fed with PWM+ from DDM and use the same ground as the breaker.
| Pin | Signal type | Description |
| 1 | Power supply 5V | Lighting Pulse modulation + (PWM) from DDM |
| 2 | Ground | When the button is pressed in |
| 4 | Ground | Body ground to breaker and LEDs |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
