Injectors (206), Simtec
Injectors (206), Simtec |
Location |
• |
Injector, cyl 1 (206a)
|
• |
Injector, cyl. 2 (206b)
|
• |
Injector, cyl. 3 (206c)
|
• |
Injector, cyl. 4 (206d)
|
Principal use |
Adds fuel to the air streaming into the cylinders.
Type |
The injectors are solenoid type with needle and seat. They open when current flows through the coils and close with the help of a strong spring when current is interrupted.
Connection |
Pin No. | Signal type | Description |
1 | Power supply, B+ | Injector's power supply from the main relay. |
2 | Control | Injector's control. The injector is grounded by ECM. Injector cyl 1: ECM pin 33(B) Injector cyl 2: ECM pin 49(B) Injector cyl 3: ECM pin 51(B) Injector cyl 4: ECM pin 50(B) |
Wiring diagram, injector 1 (206a)
Wiring diagram, injector 2 (206b)
Wiring diagram, injector 3 (206c)
Wiring diagram, injector 4 (206d)