Position sensor, soft top raised (577c)
| Position sensor, soft top raised (577c) |
| Main task |
The sensor gives information to the STC control module indicating if the soft top is raised.
Lowered
Raised
| Type |
Hall sensor with inbuilt magnet.
Technical data
| Connection |
| Pin No. | Signal type | Description |
| 1 | Signal output | Soft top not raised (unaffected sensor) = 2.4-3.4 V Soft top raised (unaffected sensor) = 0.4-1.2 V |
| 2 | Power supply B+ | From the control module, STC |
The sensor is connected to the STC control module with two leads. The sensor is energized with B+ on pin 2 and gives information to the STC control module on pin 1.
The sensor is affected by the cylinder piston. The sensor is affected when the piston is in its outermost position and the soft top is raised.
Diagram
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
