Torque converter
Torque converter |
To remove |
1. |
Remove the gearbox, see
Automatic transmission assembly Z19DTH
, and
Automatic transmission assembly B284
.
|
2. |
B284:
Fit
87 92 681 Handle, torque converter
.
Z19DTH: Fit KM-574 Handle, torque converter . |
3. |
Lift out the torque converter (A). Collect any spilled oil.
|
To fit |
1. |
Align the torque converter (A).
|
2. |
Check that the torque converter has reached the correct position by placing a steel ruler on the torque converter shell's mating surface and measure the distance between the mating surface and the driver plate contact surface on the torque converter.
B284: The distance should be: min. 9 mm. Z19DTH: The distance should be: min. 15 mm. |
3. |
Fit the gearbox, see
Automatic transmission assembly Z19DTH
and
Automatic transmission assembly B284
.
|