SAAB WIS ONLINE

Reversing light switch, replacement or sealing

Reversing light switch, replacement or sealing



1. Remove the connector from the wiring loom to the reversing light switch (1).

2. Remove the reversing light switch and take off the sealing ring.

3. Re-fit the reversing light switch to the gearbox with a new sealing ring. Tightening torque 20 Nm.

4. Re-connect the reversing light switch to the wiring loom.

5. Check the gearbox oil level and adjust if necessary. See service procedure Gearbox oil level, checking and correcting F17 .