Procedure after disconnecting the battery
|
Procedure after disconnecting the battery
|
1.
|
Clear diagnostic trouble codes in all systems.
Important
|
Some diagnostic trouble codes can be generated if there is a voltage drop. These diagnostic trouble codes can be ignored and will not be regenerated after deletion.
|
|
|
3.
|
Synchronise the remote control code by inserting the key into the ignition.
Note
|
When the CIM has been without a voltage supply, the car must be driven at a speed of at least 7 km/h (11 mph) and then stand still before the steering lock can function correctly.
|
Important
|
Draw the customer's attention to the fact that all remote controls must be synchronised by placing the key/keys in the ignition lock. If this is not done, the remote control will not work.
|
|
|
4.
|
Cars with pinch protection:
Program the pinch protection, see
Programming pinch protection
.
Warning
|
The trap protection is not active until the window lifters have been calibrated after a power failure.
|
|
|
|
|
|