Rear protective mouldings
|
|
Rear protective mouldings
|
|
2.
|
First remove the protective corner moulding by carefully inserting the tool in under the corner of the moulding. Release the clips from the bumper shell.
|
|
1.
|
Fit the centre protective moulding using the guide pin located at the top of the moulding. Press the moulding into place.
|
|
2.
|
Fit the corner mouldings by using the locating lugs to position them correctly. Press the mouldings into place.
|
|
3.
|
Check that all clips have fastened in the bumper shell.
|
