SAAB WIS ONLINE

Compressor belt pulley, To remove and To fit, Z18XE

Compressor belt pulley, To remove and To fit, Z18XE

Important: The compressor belt pulley and the compressor clutch must be replaced together during a replacement. The service department delivers these parts as a set.

To remove


1. Remove the compressor clutch

see method description, Compressor clutch, To remove and To fit, Z18XE

2. Remove the compressor belt pulley:


- Remove the circlip (1)

- Position the removal adapter on the housing - Use MKM-6319-3 (2)

- Pull off the compressor belt pulley - Use MKM-8433 (3) with MK-J-33025 (4)


To fit


1. Fit the compressor belt pulley:


- Press the compressor belt pulley onto the housing - Use MKM-6319-2 (1)

- Fit the circlip

2. Fit the compressor clutch

see method description, Compressor clutch, To remove and To fit, Z18XE