Soft top storage drive with locks
Soft top storage drive with locks |
Removing |
The soft top storage drive is located on the right-hand side of the car.
1. |
Open the soft top cover. Raise the sixth bow and support it with
82 93 847 Soft top support
.
|
2. |
Remove the soft top storage bolts.
|
3. |
Unhook the cable from the soft top storage drive.
|
4. |
Remove the retaining bolts from the soft top storage drive.
|
5. |
Remove the clips from the idler pulley pin.
|
6. |
Undo the idler pulley and unhook the cable from the holder.
|
7. |
Unplug the position sensor connector.
|
8. |
Remove the cable locks on the soft top cover hinge. Unhook the cable.
|
9. |
Loosen the upper clips on the torsion box for the cable.
|
10. |
Remove the soft top support. Close the soft top cover and sixth bow.
|
11. |
Open the boot lid.
|
12. |
Remove the
Luggage compartment side trim, CV
on the right-hand side.
|
13. |
Undo the control module nuts. Lay the control module to one side.
|
14. |
Loosen the cable clip.
|
15. |
Close the boot lid. Open the sixth bow and the soft top cover. Secure with the soft top support.
|
16. |
Lift out the soft top storage drive with cable.
|
17. |
Transfer the position sensor to the spare part if possible.
|
Fitting |
1. |
Hook the cable onto the holder.
|
2. |
Fit the idler pulley and the clip to the soft top storage mechanism. Hook on the end of the cable.
|
4. |
Place the soft top storage drive (complete with cable) in mounting position.
|
5. |
Fit the bolts to the soft top storage drive.
|
6. |
Fit the soft top storage bolts.
|
7. |
Lower the cable into the luggage compartment. The cable must be behind the trim.
|
8. |
Fit the upper cable clip on the torsion box. Note the position of the cable.
|
9. |
Remove the soft top support. Close the soft top cover and sixth bow.
|
10. |
Open the boot lid.
|
11. |
Put the cable in mounting position. The cable must be lying behind the hose package. Make sure the cable is drawn correctly.
|
12. |
Fit the cable clip.
|
13. |
Fit the control module.
|
14. |
Close the boot lid. Open the soft top cover and the sixth bow. Secure with the soft top support.
|
15. |
Fit the cable to the soft top cover hinge with a pair of pliers. The cable must be lying behind the emergency operation tool. Fit the locks.
|
16. |
Fit
Luggage compartment side trim, CV
.
|
17. |
Remove the soft top support and close the soft top.
|
18. |
Check the function of the soft top and soft top storage.
|
19. |
Connect the diagnostics tool and erase any diagnostic trouble code.
|