Rear side trim, 5D
Rear side trim, 5D |
To remove |
1. |
Remove
C-pillar trim, 5D
.
|
2. |
Remove
Side bolster, 5D
.
|
3. |
Remove the clip from the mounting in the body. Use a screwdriver.
|
4. |
Remove the two-stage rivet using
84 71 179 Removal tool, clips
.
|
5. |
Remove the mounting for the concealing panel where appropriate.
|
6. |
Remove the cover.
|
7. |
Remove the screw.
|
8. |
Lift away the cover over the storage compartment.
|
9. |
remove the glass from the luggage compartment light and detach the connector.
|
10. |
Pull off the trim so the clips come loose.
|
To fit |
1. |
Plug in the connector for the luggage compartment lighting. Fit the glass on the luggage compartment light.
|
2. |
Fit the trim so the clips fasten.
|
3. |
Fit the cover over the storage compartment.
|
4. |
Fit the screw.
|
5. |
Fit the cover.
|
6. |
Fit the mounting for the concealing panel where appropriate.
|
7. |
Fit the two-stage rivet.
|
8. |
Fit the clips from the mounting in the body.
|
9. |
Fit
Side bolster, 5D
.
|
10. |
Fit
C-pillar trim, 5D
.
|