Sound absorbent panel, rear wheel housing
|
Sound absorbent panel, rear wheel housing
|
2.
|
Lift off the floor panel from the centre mounting of the rear back rest. Lift out the floor panel.
|
3.
|
Remove the 3 two-stage rivets from the parcel shelf.
|
5.
|
Remove the clips which attach the luggage compartment inspection cover using special tool
84 71 179 removal tool, clips
and remove the inspection cover.
|
6.
|
Remove the two-stage rivets and the two clips which attach the luggage compartment side trim. Use the
84 71 179 removal tool, clips
. Remove the side trim.
|
8.
|
Remove the two plugs holding the sound absorbent panel.
|
9.
|
Remove the sound absorbent panel.
|
1.
|
Fit the sound absorbent panel with the two plugs.
|
2.
|
Fit the cables to the sound absorbent panel with the cable clips.
|
3.
|
Fit the luggage compartment side trim with the two-stage rivets and the two clips.
|
4.
|
Fit the luggage compartment inspection cover with the clips.
|
6.
|
Fit the 3 two-stage rivets on the parcel shelf.
|
7.
|
Lift in the floor panel. Make sure that the floor panel is correctly located over the centre mounting of the rear back rest.
|