EDC16 MY07½ / P0500 7F
Read the instructions below then
start the fault diagnostic procedure.
TCS/ESP Missing on Bus
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| No or faulty vehicle speed signal from TCS/ESP for 0,26 s. |
Checking the wiring harness
| • | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
| • | Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force. |
Diagnostic help
Diagnosis regards:
| See fault diagnosis for the TCS/ESP DTC in question and bus fault diagnosis. |
| Electrical fault on bus leads or in the component. |
Functions in the diagnostic tool related to the fault:
