EDC16 MY07½ / P0602 4A
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Control Module not Added
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Wheel circumference not programmed. |
System reaction to a fault:
OK report:
| Fault criteria NOT fulfilled. |
Diagnostic help
Diagnosis regards:
| See "After fitting a control module" under fault diagnosis, general. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
