EDC16 MY07½ / P1616 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Car does not start.
Message appears in display.
EDC16 or CIM Not Added
Fault symptom
Car does not start.
Message appears in display.
On-board diagnosis
Type of diagnosis:
Fault criteria:
| CIM or other ECU on the I-bus not programmed. |
OK report:
| Fault criteria NOT fulfilled. |
Diagnostic help
Diagnosis regards:
| See "After fitting a control module" under fault diagnosis, general. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
